Loctite EA 3471 A&B
€70,00
Loctite EA 3471 NA is a steel reinforced, two-part epoxy repair putty that cures to a metal-like finish and can be machined, drilled, tapped or filed. Typical applications include
repairing non-structural defects in castings, making jigs and fixtures, sealing vessels, tanks and valves, resurfacing worn air seals and filling cavitated areas. This product is typically
used in applications with an operating range of -30 °C to 105°C.
Minimum Order Quantity:
- 500 g: 10.
To check the availability and delivery times of this product, you can write us an email to commerciale1@apserviceandparts.it.
- Description
- Additional information
- Technical Data Sheet
- Reviews (0)
Description
TYPICAL PROPERTIES OF UNCURED MATERIAL
- Resin:
- Density @ 22 °C 2.43
- Hardener:
- Density @ 22 °C 1.08
- Mixed:
- Weight per volume kg/L 2.64 to 2.76 (lbs/gal) (22 to 23)
- Flash Point – See SDS
TYPICAL CURING PERFORMANCE
Curing Properties
Gel Time @ 21 °C, minutes 35 to 40
Working life, minutes 30
Cure Speed vs. Temperature
The graph below shows the shear strength developed with time on grit blasted steel lap shears at different temperatures and tested according to ISO 4587.
Additional information
| Weight | 0,998 kg |
|---|---|
| Technology | Epoxy |
| Chemical Type | Epoxy |
| Appearance (uncured) | Grey (Resin), Grey putty (Mixed), White (Hardener) |
| Mix Ratio by weight | 6.25 : 1, Resin : Hardener |
| Mix Ratio by volume | 2.5 : 1, Resin : Hardener |
| Cure | Room temperature cure after mixing |
| Application | Metal repair |
| Specific Benefit | High steel content – cures to a metal-like finish, Rebuilds worn parts fast – limits downtime, Superior adhesion – bonds well to all metal substrates, Will not sag or shrink |
| Quantity | 500 g |
| Brand | |
| EAN | 0689830151139 |
Only logged in customers who have purchased this product may leave a review.
Reviews
There are no reviews yet.