Loctite 574
€30,50 – €119,80
Loctite 574 seals close fitting joints between rigid metal faces and flanges. The product cures when confined in the absence of air between close fitting metal surfaces. Provides
resistance to low pressures immediately after assembly of flanges. Typically used as a form-in-place gasket on rigid flanged connections, e.g. gearbox and engine casings, etc.
The thixotropic nature of Loctite 574 reduces the migration of liquid product after application to the substrate.
This product may vary on delivery times.
Minimum Order Quantity:
- 50 ml: 12;
- 250 ml: 1.
- Description
- Additional information
- Technical Data Sheet
- Reviews (0)
Description
TYPICAL PROPERTIES OF UNCURED MATERIAL
- Specific Gravity @ 25 °C 1.1
- Flash Point – See SDS
- Viscosity, Brookfield – RVT, 25 °C, mPa·s (cP):
- Spindle 6, speed 2.5 rpm, 70,000 to 120,000LMS
- Spindle 6, speed 20 rpm 23,000 to 35,000LMS
TYPICAL CURING PERFORMANCE
Cure Speed vs. Substrate
The rate of cure will depend on the substrate used. The graph below shows the shear strength developed with time on grit blasted steel lap shears compared to different materials and tested according to ISO 4587.
Cure Speed vs. Bond Gap
The rate of cure will depend on the bondline gap. The following graph shows shear strength developed with time on grit blasted steel lap shears at different controlled gaps and tested according to ISO 4587.
Cure Speed vs. Temperature
The rate of cure will depend on the ambient temperature. The graph below shows the shear strength developed with time on grit blasted steel lap shears at different temperatures and tested according to ISO 4587.
Cure Speed vs. Activator
Where cure speed is unacceptably long, or large gaps are present, applying activator to the surface will improve cure speed. The graph below shows the shear strength developed with time on grit blasted steel lap shears using and tested according to ISO 4587.
Additional information
| Weight | N/A |
|---|---|
| Technology | Acrylic |
| Chemical Type | Dimethacrylate ester |
| Appearance (uncured) | Orange paste |
| Fluorescence | Positive under UV light |
| Components | One component – requires no mixing |
| Viscosity | Thixotropic |
| Cure | Anaerobic |
| Application | Gasketing and sealing |
| Strength | Medium |
| Quantity | 250 ml, 50 ml |
| Brand | |
| EAN | 0079340240186 |
Only logged in customers who have purchased this product may leave a review.
Reviews
There are no reviews yet.