€14,25 – €173,90
Loctite 603 is designed for the bonding of cylindrical fitting parts, particularly where consistently clean surfaces cannot be assured. The product cures when confined in the absence of
air between close fitting metal surfaces and prevents loosening and leakage from shock and vibration. Typical applications include retaining roller bearings or oil impregnated bushings
This product may vary on delivery times.
Minimum Order Quantity:
- 10 ml: 12;
- 50 ml: 12;
- 250 ml: 1.
- Additional information
- Technical Data Sheet
- Reviews (0)
Registered to NSF Category P1 for use as a sealant where there is no possibilty of food contact in and around food processing areas. Note: This is a regional approval. Please contact your local Technical Service Center for more information and clarification.
TYPICAL PROPERTIES OF UNCURED MATERIAL
- Specific Gravity @ 25 °C 1.1
- Flash Point – See SDS
- Viscosity, Brookfield – RVT, 25 °C, mPa·s (cP):
- Spindle 1, speed 20 rpm, 100 to 150LMS
- Viscosity, EN 12092 – MV, 25 °C, after 180 s, mPa·s (cP):
- Shear rate 277 s-1 90 to 180
TYPICAL CURING PERFORMANCE
Cure Speed vs. Substrate
The rate of cure will depend on the substrate used. The graph below shows the shear strength developed with time on steel pins and collars compared to different materials and tested according to ISO 10123.
Cure Speed vs. Bond Gap
The rate of cure will depend on the bondline gap. The following graph shows shear strength developed with time on steel pins and collars at different controlled gaps and tested according to
Cure Speed vs. Temperature
The rate of cure will depend on the temperature. The graph below shows the shear strength developed with time at different temperatures on steel pins and collars and tested according to ISO 10123.
Cure Speed vs. Activator
Where cure speed is unacceptably long, or large gaps are present, applying activator to the surface will improve cure speed. The graph below shows the shear strength developed with time on zinc dichromate steel pins and collars using Activator 7471™ and 7649™ and tested according to ISO 10123.
Positive under UV light
One component – requires no mixing
10 ml, 250 ml, 50 ml
Only logged in customers who have purchased this product may leave a review.